home *** CD-ROM | disk | FTP | other *** search
- Path: comma.rhein.de!serpens!not-for-mail
- From: mlelstv@serpens.rhein.de (Michael van Elst)
- Newsgroups: comp.sys.amiga.misc
- Subject: Re: New Press Release!
- Date: 15 Mar 1996 10:10:34 +0100
- Organization: dis-
- Message-ID: <4ibc6a$pvl@serpens.rhein.de>
- References: <9603060924.AA00108@ancient.demon.co.uk> <826276820.14613@hchworth.demon.co.uk> <4hu0b5$ouj@coranto.ucs.mun.ca> <4hu7ej$evu@serpens.rhein.de> <4ib5bv$54b@coranto.ucs.mun.ca>
- NNTP-Posting-Host: serpens.rhein.de
- Keywords: Boards
-
- gnoel@morgan.ucs.mun.ca (George Noel) writes:
-
- >In article <4hu7ej$evu@serpens.rhein.de>,
- >Michael van Elst <mlelstv@serpens.rhein.de> wrote:
- >>gnoel@morgan.ucs.mun.ca (George Noel) writes:
- >>Get a clue. You cannot simply replace a 030 with a 040 or 060.
-
- >Via expansion boards you can.
-
- *sigh*
-
- Would you please read what this talk was about ? To use a socket for
- the 030 so that you "could" simply replace the chip with a different one.
- This is not possible, because the chips are neither pin nor electrically
- compatible.
-
- You explicitely _need_ an expansion board, that's why surface mounting
- the chips is _not_ a problem for upgrading.
-
-
- --
- Michael van Elst
-
- Internet: mlelstv@serpens.rhein.de
- "A potential Snark may lurk in every tree."
-